Deburring Chamfering Tool - Remove Burr For Repair Bolt Thread Drilling Tool
$14.99
Sale price
$14.99
Regular price
Skip to product information
Deburring Chamfering Tool - Remove Burr For Repair Bolt Thread Drilling Tool
$14.99
Sale price
$14.99
Regular price
- Free shipping on orders over $69
- Easy 30-day returns
- Secure payments
External deburring and chamfer tool · for bolts and threaded rod
Clean edges and threads that start true.
Cutting a bolt or threaded rod to length leaves a rough end. Put this head in your drill, press it over the end for a moment, and three steel blades strip the burr and cut a neat chamfer all the way around, so the first thread is clean and the nut spins straight on.
It suits shortened bolts, all-thread rod, screws, round bar and the cut ends of small pipe and tube. One tool for the whole job.
How it works
Three blades, one quick pass.
Inside the cone, three steel blades sit at an angle. As the head spins over the rod end, they trim the burr and cut an even chamfer all the way around in seconds.
Clamp the work, wear safety glasses, run the drill at a moderate speed and press lightly and straight. Check the end and give it another touch if the burr is heavy.
What buyers say
Rated 4.7 stars by 13 buyers.
- Norberto Q. “I used to struggle with burrs on bolts, but this tool solved that problem effortlessly. Highly recommend!”
- Mark R. “I’ve tried other deburring tools before, but it is by far the best. It’s easy to use and delivers fantastic results every time.”
- Brian G. “Deburring bolts used to be a tedious task, but now it’s a quick and painless process.”
- Michael A. “It is easy to use even for beginners like me. The instructions are clear, and the results speak for themselves - smooth bolts every time.”
- Angel Q. “It’s made my DIY projects a lot more enjoyable and has become an indispensable tool in my toolbox.”
Every order is covered by the Gear Elevation 90-day money-back guarantee.
In the box
Two pieces, ready for your drill.
1 deburring headBlack steel head with three blades inside the cone
1 hex shank1/4 in hex, screws into the back of the head and chucks into your own drill or driver
What it fits
Rods about 1/8 to 3/4 in across.
The cone takes round stock from 3 to 20 mm in diameter, which covers most bolts, screws and threaded rod in a home shop.
Use it on mild steel, brass, copper, fiberglass and hard plastic. It cleans the outside edge of the stock, right where nuts and fittings start, and the head fits in the tool box between jobs.
Specifications
The details, plainly.
What it isExternal deburring and chamfer tool for a drill
FitsRound stock about 1/8 to 3/4 in (3 to 20 mm) diameter, per the maker
Shank1/4 in hex, screw-on
CuttingThree steel blades inside a conical head
Works onMild steel, brass, copper, fiberglass and hard plastic
FinishBlack
In the box1 head and 1 hex shank, ready for your own drill or driver
Cut it, clean it, thread it on.
Every bolt you shorten finishes with a clean edge and a first thread that starts true. Put it in the drill, press it on for a moment, and the nut spins straight on.
Backed by our 90-day money-back guarantee.